Features

IT-51 - 5 KV Digital Insulation Tester With PI

• Selectable test voltage from 250V, 500V, 1000V, 2500V, 5000V DC.
• Insulation Resistance measurement up to 1 TOhm
• Polarization Index measurement facility Short circuit current < 1.4 mA. approx.
• AC/DC voltage measurement up to 600V.
• Two Programmable timer from 0 Sec to 99 minutes.
• Liquid Crystal Display with pleasant blue backlit.
• Internal rechargeable Battery.

Features

i-12 - 1 KV Digital Insutester With 2 GOhm Measurement Range

• NO-GO test facility.
• Pre selectable Timer facility, Mains Eliminator.
• Selectable voltage facility 50,100,250,500 &1000V.
• Insulation resistance range up to 2 GOhm Auto AC/DC 600V measurement.
• Live circuit detection up to 600V AC/DC.
• Low resistance measurement up to 100 Ohm with continuity testing.
• Temporary storage of 10 readings.
• Auto power off facility.

Features

Insulation Tester- D2K-M

• 3 ½ digit 0.65" LCD.
• Selectable multi test voltage from 100 V to 1000V DC.
• AC voltage measurement upto 750V (50Hz to 500Hz)
• Resistance measurement upto 2000 MOhm. In two ranges of 200 MOhm and 2000MOhm on all test voltages.
• 1mA short circuit current for faster readings in case of capacitive load.
• Special low noise leads to eliminate use of seperate guard lead.

Features

Insulation Tester B50K

• AC mains 230V (optional 110V) cum internal rechargeable sealed maintenance free lead acid battery operated.
• Built in Battery charger.
• Selectable test voltages.
• Automatic external voltage detection and warning.
• Accurate and precise resistance measurement using ratiometric measurement technique.
• Automatic discharge of capacitive circuit, after insulation test.
• Protected against accidental connection to 230V/440 AC supplies.

Features

Insulation Tester B500K

• AC mains 230V (optional 110V) cum internal rechargeable sealed maintenance free lead acid battery operated.
• Built in Battery charger.
• Selectable test voltages.
• Automatic external voltage detection and warning.
• Accurate and precise resistance measurement using ratiometric measurement technique.
• Automatic discharge of capacitive circuit, after insulation test.
• Protected against accidental connection to 230V/440 AC supplies.

Features

M63 - TRMS Heavy Duty 6000 Count Industrial Grade Multimeter

• 6000 count Trms with white backlit.
• AC/DC current range upto 20A.
• Rugged, robust industrial grade multimeter
• Highly linear, safe and reliable
• CE/CAT IV,600V/IP-54
• IEC 61010-1-2010 compliance.

Features

M65 - TRMS High Accuracy 6000 Count Dual Display Multimeter

• 6000 count Trms with Dual display.
• Basic accuracy of 0.25%
• Capacitance range up to 60mF
• CAT III,1000V/IP-54 protected

Features

Digital Multimeter - DM 3540 A

• 3 ¾ digit autoranging Digital Multimeter with large LCD Display.
• Single Rotary Switch operation.
• Automatic Polarity, Low Battery and over range indication.
• 33 Segment Bar graph display.
• Auto AC/DC Amp.Selection.
• Auto AC/DC Volt selection
• Auto Power Off. & Data hold facility.

Features

Digital Clamp Meter - DCM 39A

• 1000Amp AC/DC measurement
• True RMS thereby allowing measurement of distorted wave form
• Multimeter + Clamp Meter.
• CAT III safety compliance.

Features

Digital Clamp Meter - DCM 10A

• Measures Leakage Current
• Helps in diagnosing frequent circuit breaker tripping
• CATIII Safety Compliance
• Detect Power loss, Save energy & Improves efficiency of electrical systems
• Suitable for hazardious environments.
• Pocket size, Handy & light weight

Features

Digital Clamp Meter - DCM 30A

• 3½ digit (1999 counts) Backlit LCD Display with annunciators.
• Overload protection on all ranges.
• Range 1000Amp AC.
• Size (HxWxL) 260 x 91 x 44.5 mm (approx.).
• Max jaw opening: 50 mm. (approx.).
• Power: One 9V Battery Type 6F 22 or equivalent.

Features

Digital Clamp Meter - DCM 49A

• 3 ¾ digit LCD, 4000 counts, Multi function 1 000A AC/DC.
• Large Jaw Size: 60mm.
• Function Rich: AC/DC Current, AC/DC Voltage, Resistance, Diode, Continuity, Capacitance, Frequency and Duty Cycle.
• Large Backlit display with rich annunciations.
• Auto Power Off for battery life saving.
• Relative Reading and Data Hold Functions.
• Ergonomic Design for holding.
• Suitable for use in Appliance Testing, Portable Tools, Building Wiring, Testing of Electronic/Electrical Products.

Features

Digital Earth Tester - DECT3

• Does not require breaking down grounding wire and need no auxiliary electrode
• Long Jaw size: 65 X 32 mmØ - The unique long Jaw is particularly suitable where grounding is done by flat steel or copper strips
• Resistance measurement range: 0.01Ohm to 1200 Ohm
• AC Leakage Current measurement range: 0 to 20A
• RS 232 interface for monitoring, uploading , analyzing and printing of data
• Memory storage capability of 99 records

Features

Digital Earth Tester - DET20

• 3 ½ digits LCD display.
• 0.01Ohms / 10mA / 128 Hz / Less than 40 V.
• Earth voltage measurement 0.1 to 200 V.
• Soil Resistivity measurement.
• Earth Resistance measurement .
• Measuring Ranges 20 / 200 / 2000 Ohm.
• Withstands 240V RMS 50Hz applied between any two terminals for 1 min.
• Maximum Output Voltage Less than 40 Vrms as per standards.

Features

Digital Earth Tester - DECT2

• Stakeless Testing.
• Battery Operated, 6V DC.
• Long Jaw Size 65mm x 32mm. suitable for flat metel strips used for earthing.
• Measures Earth resistance in 30 Sec.
• Double insulation and protect from external magnetic as well as electric field.
• Low Battery Indication.
• Power Consumption: Approx. 5mW, 50 hours continuous.

Features

• 3½ Digit large 7 segment Display.
• Six measurement ranges from 20 mOhm to 2000Ohm.
• Fully protected against Back-Emf on account of heavy inductive loads.
• High test current (2Amps on 20mOhms & 200mOhms range) for fast & stable readings.
• Pulse mode operation with 10 second pulse.
• Helps to save energy by monitoring I²R losses.